AUSTEST Laboratories (Main Office)

Ground Floor
35 Alleyne Street
CHATSWOOD NSW 2067

This facility complies with the requirements of ISO/IEC 17025:2005

3.41 Electromagnetic compatibility - emission testing

3.41 Electromagnetic compatibility - emission testing Electromagnetic interference tests to:
AS/NZS 1044, CISPR14, and EN55014
AS/NZS 2064, CISPR11, AS/NZS CISPR 11 and EN55011 (excluding radiated interference < 30 MHz and > 1GHz)
AS/NZS 3548, CISPR22, AS/NZS CISPR 22 and EN55022 in the frequency range 150 kHz to 1 GHz (excluding disturbances at telecommunications ports)
AS/NZS 4251.1 excepting measurements below 2 kHz
AS/NZS 1053,AS/NZS CISPR 13 (excluding broadcast satellite receivers and the disturbance voltage at antenna terminals test for other than 75 O coaxial equipment)
EN 61000-6-3 excluding tests on signal and control lines
.01 Conducted interference
.02 Radiated interference

3.75 Approval tests on telecommunications equipment

3.75 Approval tests on telecommunications equipment Tests for compliance with requirements of ACA Technical Standards:
TS 002, TS 003 Clauses 5.1 to 5.4 for testing of ring-in/loop-out CE only, TS 004, TS 006, TS 018 Clause 5.8 Emergency calling, Clause 5.10 Ignition of flammable atmospheres via user manual identification of hazards only, Clause 5.11.2 Protection of IMEI against change via manufacturer's declaration only, Clause 5.11.3;
Unique identification via manufacturer's declaration only;
Tests for compliance with requirements of:
AS/ACIF S002
AS/ACIF S003
AS/ACIF S004
AS/ACIF S006
AS/ACIF S043
AS/ACIF S040
AS/ACIF S008 excluding (5.3.2, 5.4.1.5, 5.8, 5.9, 5.12.1)
AS/ACIF S041.1
AS/ACIF S041.2

3.80 Approval tests on electrical appliances and accessories

Tests for compliance with requirements of AS/NZS 60950, IEC 60950 and EN60950
3.80 Approval tests on electrical appliances and accessories Test and examinations for compliance to the following standards, excluding IP and tracking tests:
AS/NZS 3109.1 (for group1 and cold conditions only)
AS/NZS 3112 (excluding plugs integrally moulded to elastomeric cords)
AS/NZS 3122
AS/NZS 60065, IEC 60065, EN 60065
AS/NZS 60320.1 excluding 'Hot' and 'Very Hot' conditions
AS/NZS 60950.1
AS/NZS 60598 .2.4, .2.6, .2.20 and the relevant tests of AS/NZS 60598.1 and the IEC and EN equivalent standards
AS/NZS 61558.2.6, AS/NZS 61558.2.7 and the relevant tests of AS/NZS 61558.1 and the IEC and EN equivalent standards
AS/NZS 3350.1, IEC 60335-1, AS/NZS 60335.1 and EN 60335-1
and the associated part 2 series of the standards for the following equipment types:
part .2.3
part .2.6 (excluding induction hobs)
part .2.9
part .2.15
part .2.23 (for hair dryers only)
part .2.24
part .2.29
part .2.30 (for radiant and fan heaters only)
part .2.80 (for table and pedestal fans only)

Accreditation No: 3149
(Scope Last Changed 18-APR-07 )

SA Laboratory

Unit 3, 4 Aristotle Close
GOLDEN GROVE SA 5125
CONTACT: Mr P A Kay

3.41 Electromagnetic compatibility - emission testing

Electromagnetic interference tests to :
AS/NZS 1044, EN 55014-1 and CISPR 14-1
AS/NZS CISPR 11, EN 55011 and CISPR 11 (excluding radiated
interference <30 MHz and >1 GHz and induction cookers)
AS/NZS CISPR 22, EN 55022 and CISPR 22 in the frequency range
150 kHz to 1 GHz (excluding disturbances at telecommunications ports)
AS/NZS 4251.1, EN 61000-6-3 and EN 61000-6-4 excepting measurements
at and below 2 kHz

.01 Conducted interference
.02 Radiated interference

Accreditation No: 13956
(Scope Last Changed 22/07/03)

This inspection body complies with the requirements of AS/NZS ISO/IEC 17020 (2000)

Manufactured goods

3.03 Electrical and electronic products
.01 Electromagnetic compatibility
Design verification and Technical Construction File (TCF) examination by Competent Bodies
Code: EMC Framework
EMC emission control of devices covered by generic and specific emission standards as listed in Schedule 1 of the Radiocommunications (Electromagnetic Compatibility) Standard 2001

Code 89/336/EEC as amended
EMC emission control and EMC immunity control of all electrical and electronic apparatus covered by the European EMC Directive

European regulatory requirements

90.03 Electromagnetic Compatibility Directive
Refer to 03.03.01
Code: 89/336/EEC as amended
Technical reports and certificates for all electrical and electronic apparatus covered by the European EMC Directive excluding radio-communication transmitters not connected to the public switched telecommunication networks

Accreditation No: 12667
(Scope Last Changed 18/08/98 )